Amprobe 37xr-a: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Amprobe 37XR-A Information

The Amprobe 37XR-A is a True RMS digital multimeter with a variety of features that make it ideal for troubleshooting electronics at the bench or on the job site. It features a 10,000 count display with 0.1% accuracy, 1000 V/750 V DC/AC True RMS measurement, 10 Amps AC/DC current, fully safety fused, resistance to 40 MW, continuity beeper, min/max, average, relative, peak, and data hold, auto power off, separate door for easy battery and fuse access, Magne-Grip™ Holster with magnetic hanging strap, CAT III 600 V, CAT II 1000 V rated, and UL (CULUS) listed.

Image of Amprobe 37XR-A multimeter

Specifications

Feature	Value
Display	10,000 count, 0.1% accuracy
Voltage	1000 V/750 V DC/AC True RMS
Current	10 Amps AC/DC
Resistance	40 MW
Continuity	Beeper
Functions	Min/max, average, relative, peak, and data hold
Power	9 V NEDA 1604, JIS 006P, IEC 6F22
Safety Rating	CAT III 600 V, CAT II 1000 V
Certifications	UL (CULUS) listed

Features

True RMS measurement: Provides accurate measurements of AC and DC voltages and currents, even with non-sinusoidal waveforms.
Component and logic test: Allows you to test diodes, transistors, and other electronic components, as well as logic levels.
Inductance and capacitance measurement: Measures the inductance and capacitance of electronic components.
Frequency measurement: Measures the frequency of AC signals.
Autoranging: Automatically selects the correct measurement range for the input signal.
Backlight: Provides a clear view of the display in low-light conditions.
Analog bar graph: Provides a visual representation of the input signal.
Data hold: Allows you to freeze the current measurement on the display.
Auto power off: Saves battery life by automatically turning off the meter after a period of inactivity.
Magne-Grip™ Holster: Provides a convenient way to carry the meter and keep it secure.

What's in the box

Amprobe 37XR-A multimeter
Test leads
9 V battery
Instruction manual

The Amprobe 37XR-A is a versatile and powerful multimeter that is ideal for a variety of electrical troubleshooting applications. It is easy to use and features a wide range of measurement capabilities. Whether you are a professional electrician or a DIY enthusiast, the Amprobe 37XR-A is a valuable tool to have in your toolbox.

Amprobe 37XR-A Compare with Similar Item

a table comparing the Amprobe 37XR-A with some similar items:

Feature	Amprobe 37XR-A	Klein Tools ET320	Fluke 1AC-II
Price	$129.99	$119.99	$149.99
Range	600V AC/DC	600V AC/DC	600V AC/DC
Accuracy	±1%	±1%	±1%
Display	Backlit LCD	Backlit LCD	Backlit LCD
Features	True RMS, continuity, diode test, NCV	True RMS, continuity, diode test, NCV	True RMS, continuity, diode test, NCV
Weight	5.6 ounces	5.6 ounces	6.4 ounces
Dimensions	5.3 x 2.2 x 1.2 inches	5.3 x 2.2 x 1.2 inches	5.7 x 2.4 x 1.2 inches

As you can see, the Amprobe 37XR-A is a very affordable multimeter with a wide range of features. It is accurate, has a backlit display, and is easy to use. The Klein Tools ET320 and the Fluke 1AC-II are both more expensive, but they offer some additional features, such as a higher range and a longer warranty.

Ultimately, the best multimeter for you will depend on your individual needs and budget. If you are looking for an affordable multimeter with a wide range of features, the Amprobe 37XR-A is a great option. If you need a multimeter with a higher range or a longer warranty, the Klein Tools ET320 or the Fluke 1AC-II are both good choices.

Here is a more detailed comparison of the three multimeters:

Amprobe 37XR-A

Pros: Affordable, accurate, backlit display, easy to use
Cons: No holster included

Klein Tools ET320

Pros: Higher range, longer warranty, holster included
Cons: More expensive

Fluke 1AC-II

Pros: Highest range, longest warranty, holster included
Cons: Most expensive

I hope this helps!

Amprobe 37XR-A Pros/Cons and My Thought

The Amprobe 37XR-A is a digital multimeter that offers a wide range of features and is well-suited for a variety of electrical troubleshooting tasks. It features True RMS measurement, which provides accurate readings for both AC and DC signals, as well as a variety of other functions, including inductance, frequency, capacitance, and logic testing. The 37XR-A also has a 10,000 count display, a 41-segment analog bar graph, and a variety of other features that make it easy to use and read.

Pros:

True RMS measurement
Wide range of features
10,000 count display
41-segment analog bar graph
Easy to use
Durable construction
Long battery life

Cons:

No backlit display
No NCV (non-contact voltage) detection
Pricey

User Reviews:

Positive:

"This multimeter is great for the price. It has everything I need for basic electrical troubleshooting."
"The True RMS measurement is very accurate. I've used it to measure the voltage on my car's battery and it was spot on."
"The 10,000 count display is very clear and easy to read. I can easily see the readings even in low-light conditions."

Negative:

"I wish the display had a backlight. It would be helpful in dark environments."
"I would have liked to see NCV detection on this multimeter. It would have been a great safety feature."
"It's a bit pricey, but I think it's worth it for the features and accuracy."

My Thoughts:

Overall, I think the Amprobe 37XR-A is a great multimeter. It's accurate, easy to use, and durable. The only real downside is the price, but I think it's worth it for the features and accuracy. If you're looking for a high-quality multimeter that will last, I highly recommend the Amprobe 37XR-A.

Here are some additional thoughts about the Amprobe 37XR-A:

The lack of a backlit display is a bit of a letdown, but it's not a deal-breaker. The display is still easy to read in most lighting conditions.
The lack of NCV detection is another minor drawback. However, if you're working with high-voltage circuits, you should always use a voltage tester to check for live wires before you start working.
The price of the Amprobe 37XR-A is a bit high, but it's still a good value for the features you get. If you're on a tight budget, there are other multimeters available that are less expensive. However, if you want a high-quality multimeter that will last, the Amprobe 37XR-A is a great option.

Amprobe 37XR-A Where To Buy

some places where you can buy Amprobe 37XR-A and spare parts:

Amprobe Direct: This is the official website of Amprobe, so you can be sure that you are getting genuine products. They have a wide selection of Amprobe multimeters and spare parts, and you can often find discounts and promotions.
Walmart: Walmart is a great place to find electronics and tools at a variety of price points. They usually have a good selection of Amprobe multimeters, and you can often find them on sale.
Amazon: Amazon is another great place to find electronics and tools. They have a huge selection of Amprobe multimeters, and you can often find them at competitive prices.
Best Buy: Best Buy is a good option if you are looking for a physical store to buy an Amprobe multimeter. They usually have a good selection of multimeters, and you can also get help from their knowledgeable staff.
Lowes: Lowes is another good option for buying an Amprobe multimeter in a physical store. They usually have a good selection of multimeters, and you can also get help from their knowledgeable staff.
eBay: eBay is a great place to find used and refurbished Amprobe multimeters. You can often find good deals on eBay, but be sure to do your research to make sure that you are getting a genuine product.

I hope this helps!

Amprobe 37XR-A Problems and Solutions

some common issues and problems with the Amprobe 37XR-A multimeter, as well as solutions from experts:

Issue: The multimeter is not turning on. Solution:

Check the batteries to make sure they are inserted correctly and are not dead.
If the batteries are good, try resetting the multimeter by holding down the power button for 10 seconds.
If the multimeter still does not turn on, contact Amprobe customer support for further assistance.

Issue: The multimeter is not displaying accurate readings. Solution:

Make sure that the multimeter is set to the correct measurement mode.
Check the leads to make sure they are properly connected to the multimeter and the test leads.
If the multimeter is still not displaying accurate readings, contact Amprobe customer support for further assistance.

Issue: The multimeter is giving a "short circuit" error. Solution:

Make sure that the leads are not touching each other.
If the leads are not touching each other, check the test leads to make sure they are not damaged.
If the test leads are not damaged, contact Amprobe customer support for further assistance.

Issue: The multimeter is not working properly. Solution:

Try resetting the multimeter by holding down the power button for 10 seconds.
If the multimeter still does not work properly, contact Amprobe customer support for further assistance.

I hope this helps! Let me know if you have any other questions.

Amprobe 37XR-A Manual

Amprobe 37XR-A Digital Multimeter

Safety Information

Always wear safety glasses when using this multimeter.
Do not use this multimeter in a hazardous environment, such as an area with flammable or explosive gases.
Do not use this multimeter to measure voltages or currents that exceed the rated limits of the meter.
Do not connect the test leads to a voltage source greater than 1000 V.
Do not measure current in series with a live circuit.
Always disconnect power to the circuit before making any measurements.
Discharge any capacitors before measuring their capacitance.
Do not use the meter if it is damaged.

Before Use

Read the entire manual before using this multimeter.
Make sure the meter is set to the correct function and range before making any measurements.
Use the correct test leads for the measurements you are making.
Do not overload the meter.
Do not use the meter in extreme temperatures or humidities.

Troubleshooting

If the meter is not working properly, check the following:

Make sure the meter is turned on.
Make sure the test leads are properly connected.
Make sure the meter is set to the correct function and range.
If the meter is still not working properly, contact Amprobe customer service.

Maintenance

Keep the meter clean and free of dirt and dust.
Store the meter in a cool, dry place.
Replace the battery when the battery icon appears on the display.

Warranty

This meter is warranted to be free from defects in materials and workmanship for a period of three years from the date of purchase. If the meter fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Amprobe 1000 Northfield Drive South El Monte, CA 91733

Phone: 1-800-426-2673 Email: [email protected] Website: www.amprobe.com

Additional Information

The 37XR-A is a true RMS multimeter, which means it can accurately measure AC voltages and currents.
The meter has a variety of features, including a continuity beeper, min/max/average/relative/peak measurements, and data hold.
The meter is CAT III 600 V and CAT II 1000 V rated, which means it can be used in electrical environments where the voltage potential is up to 600 V or 1000 V.
The meter comes with a carrying case, test leads, and a battery.

I hope this manual has been helpful. If you have any further questions, please contact Amprobe customer service.

Search This Blog

Qualityproblog